2002 Mazda Protege Owner's Manual - Page 205
2002 Mazda Protege Manual
Page 205 highlights
J39L(02MY).book Page 13 Thursday, November 1, 2001 10:49 AM Maintenance and Care Owner Maintenance 1.8 and 2.0-liter engines Loosen Tighten NOTE • The indicated engine oil capacities are for general reference purposes only. When adding or changing oil, verify the engine oil level with the oil dipstick. • Use only specified engine oil (page 10-4). Changing oil filter Because you need a special tool to retighten the filter, an Authorized Mazda Dealer should do the work. Front Drain plug 1. Warm up the engine for a few minutes and turn it off. Remove the oil-filler cap. 2. Remove the drain plug and drain the oil into a suitable container. 3. Replace the plug tightly after the oil has thoroughly drained. 4. Fill the engine with new oil to the F mark on the dipstick. 5. Securely replace the oil-filler cap. 6. Start the engine and inspect around the drain plug for leaks. 7. Turn it off and wait 5 minutes for the oil to return to the oil pan. Check the oil level and fill to the F mark if necessary. Oil capacity (General reference only, refer to Specifications section for capacities.) 8-13 Form No. 8Q36-EA-01F