2008 Mazda CX-7 Owner's Manual - Page 119

CX-7_8X59-EA-07E_Edition3 Page119 Wednesday, July 25 2007 3:17 PM Black plate (119,1) Knowing Your Mazda Doors and Locks qOperating the Moonroof Tilt Operation The rear of the moonroof can be tilted open to provide more ventilation. To fully tilt automatically, momentarily push the rear of the tilt switch. To fully close automatically, momentarily push the front of the tilt or slide switch. To stop tilting partway, push any part of the tilt or slide switch. Close To stop sliding partway, push any part of the tilt or slide switch. Open Close Tilt up Close Close Power moonroof initialization procedure If the battery had been disconnected during vehicle maintenance or for other reasons, the moonroof may not fully open or close. The moonroof's jam-safe function does not function while the moonroof is initializing. Carry out the following procedure to resume operation: 1. Turn the ignition switch to the ON position. 2. Push the rear of the tilt switch, to partially tilt open the rear of the moonroof. NOTE If the re-initialization procedure is performed while the moonroof is in the slide position (partially open) it closes before the rear tilts opens. Slide Operation To fully open automatically, momentarily push the rear of the slide switch. To fully close automatically, momentarily push the front of the tilt or slide switch. 3. Repeat the procedure in Step 2. The rear of the moonroof tilts open to the fully open position, then closes a little. 3-41 Form No.8X59-EA-07E