2008 Mazda CX-7 Owner's Manual - Page 333
2008 Mazda CX-7 Manual
Page 333 highlights
CX-7_8X59-EA-07E_Edition3 Page333 Wednesday, July 25 2007 3:19 PM Black plate (333,1) Maintenance and Care Owner Maintenance 2. If you are changing the right Lowbeam bulb, start the engine, turn the steering wheel all the way to the right, and turn off engine. If you are changing the left Low-beam bulb, turn the steering wheel to the left. 3. Turn the screws and the center section of the plastic retainers counterclockwise and remove them, then partially peel back the mudguard. Removal 7. Swing the retaining spring out and away to free the bulb. Sealing cover 8. Carefully remove the bulb from the socket by pulling it straight back. Installation 4. Detach the electrical connector from the bulb by pulling it to the rear. 9. Replace the bulb. 10. Install the new bulb in the reverse order of removal. NOTE l l 5. Pull off the sealing cover. 6. Unhook the bulb retaining spring. l To replace the bulb, contact an Authorized Mazda Dealer. If the halogen bulb is accidentally touched, it should be cleaned with rubbing alcohol before being used. Use the protective cover and carton for the replacement bulb to dispose of the old bulb promptly and out of the reach of children. 8-41 Form No.8X59-EA-07E