2008 Mazda CX-7 Owner's Manual - Page 264

CX-7_8X59-EA-07E_Edition3 Page264 Wednesday, July 25 2007 3:19 PM Black plate (264,1) Interior Comfort Interior Equipment qClock When the ignition switch is in the ACC or ON position, the time is displayed. Time resetting While the clock is displayed, press the SET switch 1.5 seconds or more. When the switch is released, a beep will sound and the clock will be reset as follows: (Example) 12:01―12:29→12:00 12:30―12:59→1:00 NOTE When the SET switch is released, the seconds are reset to "00". With navigation system Refer to "NAVIGATION SYSTEM". Without navigation system Time setting 1. Press the CLOCK switch until a beep sounds, and "12Hr" and "24Hr" will be displayed. 2. Press the SET switch to switch between "12Hr" and "24Hr" displays. The selected display will flash. To select the desired clock setting, press the CLOCK switch again while the preferred setting is flashing. 3. "Hr. ADJUST" will be displayed next, and the hour portion of the display will flash. Press the SET switch to set the hour, then press the CLOCK switch. 4. "Min. ADJUST" will be displayed next, and the minutes portion of the display will flash. Press the SET switch to set the minutes, then press the CLOCK switch. NOTE Minutes and seconds are adjusted by the GPS, however, it is necessary to adjust hours under the following conditions: l Driving across different time zones l Daylight saving time start and end qAmbient Temperature Display (Fully Automatic Type) When the ignition switch is in the ON position, press the AMB switch to display the ambient temperature. 6-50 Form No.8X59-EA-07E