2008 Mazda CX-7 Owner's Manual - Page 336
2008 Mazda CX-7 Manual
Page 336 highlights
CX-7_8X59-EA-07E_Edition3 Page336 Wednesday, July 25 2007 3:20 PM Black plate (336,1) Maintenance and Care Owner Maintenance NOTE LED bulb replacement is not possible. The rear combination component must be replaced. 2. Disconnect the bulb by pulling it out. License plate lights 1. Wrap a flathead screwdriver with a soft cloth to prevent damage to the lens and remove the lens by carefully prying on the edge of the lens with a flathead screwdriver. 2. Disconnect the bulb by pulling it out. 3. Install the new bulb in the reverse order of removal. 3. Install the new bulb in the reverse order of removal. qReplacing Interior Light Bulbs Overhead light/Map lights (Front) Due to the complexity and difficulty of the procedure, the bulbs should be replaced by an Authorized Mazda Dealer. Overhead light (Rear), Luggage compartment light 1. Wrap a small flathead screwdriver with a soft cloth to prevent damage to the lens and remove the lens by carefully prying on the edge of the lens with the flathead screwdriver. 8-44 Form No.8X59-EA-07E