2008 Mazda CX-7 Owner's Manual - Page 47
2008 Mazda CX-7 Manual
Page 47 highlights
CX-7_8X59-EA-07E_Edition3 Page47 Wednesday, July 25 2007 3:17 PM Black plate (47,1) Essential Safety Equipment Child Restraint 2. Secure the child-restraint system with the lap portion of the lap/shoulder belt. See the manufacturer's instructions on the child-restraint system for belt routing instructions. 3. To get the retractor into the automatic locking mode, pull the shoulder belt portion of the seat belt until the entire length of the belt is out of the retractor. NOTE Inspect this function before each use of the child-restraint system. You should not be able to pull the shoulder belt out of the retractor while the system is in the automatic locking mode. When you remove the child-restraint system, be sure the belt fully retracts to return the system to emergency locking mode before occupants use the seat belts. Type A 1. If your child-restraint system requires the use of a tether strap, hook and tighten the tether strap. First, remove the anchor bracket cover on the rear end trim. 4. Push the child-restraint system firmly into the vehicle seat. Be sure the belt retracts as snugly as possible. Clicking from the retractor will be heard during retraction if the system is in the automatic locking mode. If the belt does not lock the seat down tight, repeat this step. 2. Flip over the trunk board. Trunk board 2-35 Form No.8X59-EA-07E