2003 Mercedes CL-Class Owner's Manual - Page 304
2003 Mercedes CL-Class Manual
Page 304 highlights
Practical hints Replacing bulbs Replacing bulbs for front lamps Warning! Insert the new bulb so that the base locates in the recess on the holder. G From below, press connector 2 with bulb upward onto the reflector. Align housing cover 1 and click into place. Front turn signal bulb 2 Electrical connector for high beam flasher housing bulb 3 Parking and standing lamp 4 Bulb socket for turn signal lamp 5 Low beam and high beam (Bi-Xenon) housing cover High beam flasher bulb Switch off the lights. Open the hood ( page 237). Press ends of housing cover 1 tab together and remove cover. Switch off the lights. Open the hood ( page 237). Twist bulb socket 4 counterclockwise and pull out. Push bulb into socket, turn counterclockwise and remove. Insert new bulb in socket, push in and twist clockwise. Reinsert bulb socket in lamp and twist clockwise. Do not remove the cover for the Bi-Xenon headlamp. Because of high voltage in xenon lamps, it is dangerous to replace the bulb or repair the lamp and its components. We recommend that you have such work done by a qualified technician at an authorized Mercedes-Benz Center. 1 Housing cover for high beam flasher bulb, parking and standing lamp Press connector 2 downward. Remove connector 2 with the bulb. 304
![](/manual_guide/autos/2003-mercedes-clclass-owners-manual-1f03af5/304.png)