2003 Mercedes CL-Class Owner's Manual - Page 36

Getting started Adjusting Head restraint height Warning! Seat cushion depth Seat backrest tilt Press the switch forward or backward in the direction of arrow 6 until your arms are slightly angled when holding the steering wheel. Head restraint tilt G Press the switch forward or backward in the direction of arrow 4 until your legs are supported comfortably. Seat fore and aft adjustment Press the switch forward or backward in the direction of arrow 5. Adjust to a comfortable seating position that still allows you to reach the accelerator/brake pedal safely. The position should be as far to the rear as possible, corresponding to the driver's ability to properly operate the controls. For your protection, drive only with properly positioned head restraints. Adjust head restraint to support the back of the head approximately at ear level. Do not drive the vehicle without the seat head restraints. Head restraints are intended to help reduce injuries during an accident. Press the switch up or down in the direction of arrow 1. Seat height Press the switch up or down in the direction of arrow 2. Seat cushion tilt Press the switch up or down in the direction of arrow 3 until your upper legs are lightly supported. i When moving the seat, be sure that there are no items in the footwell or behind the seats. Otherwise you could damage the seats. Manually adjust the angle of the head restraint. Push or pull on the lower edge of the head restraint cushion. 36