2003 Mercedes CL-Class Owner's Manual - Page 96

Controls in detail Seats Seats Information on seat adjustment can be found in the "Getting started" section ( page 34). Lumbar support You can adjust the contour of the seat's lumbar support to best support your back. The thumbwheels for the driver's and front passenger's seat are on the inner side of the seat. Make sure the ignition is switched on. All the lamps in the instrument cluster should light up. Set the lumbar support between 0 and 5. Easy-entry/exit feature With the easy-entry/exit feature activated, the steering wheel tilts upwards and the driver's seat moves to the rear. This allows easier entry into and exit from the vehicle when the driver's door is opened. However, the engine must be turned off. When the SmartKey is inserted in the starter switch or you have pressed the KEYLESS-GO* start/stop button once and the driver's door is closed, the steering wheel and the driver's seat return to their last set positions. Warning! G You must make sure that no one can become trapped or injured by the moving steering wheel and driver's seat when the easy-entry/exit feature is activated, the driver's door is being opened, and the engine is turned off or the SmartKey removed from the starter switch. Do not leave children unattended in the vehicle, or with access to an unlocked vehicle. Unsupervised use of vehicle equipment may cause an accident and/or serious personal injury. You can activate the following functions: Steering column: Only the steering column is adjusted. Steering column and seat: Both the steering column and the seat are adjusted. The easy-entry/exit feature can be switched on or off in the in the settings menu of the control system ( page 140). 1 Thumbwheel 96