2007 Mercedes E-Class Owner's Manual - Page 456

Practical hints Flat tire Removing the wheel Mounting the spare wheel Clean contact surfaces of wheel and wheel hub. Warning! G The jack is intended only for lifting the vehicle briefly for wheel changes. It is not suited for performing maintenance work under the vehicle. Never start the engine when the vehicle is raised. Never lie down under the raised vehicle. ! To avoid paint damage, place wheel flat against hub and hold it there while installing first wheel bolt. Warning! G 1 Alignment bolt Unscrew upper-most wheel bolt and remove. Replace this wheel bolt with alignment bolt 1 supplied in the tool kit. Remove the remaining bolts. Always replace wheel bolts that are damaged or rusted. Never apply oil or grease to wheel bolts. Damaged wheel hub threads should be repaired immediately. Do not continue to drive under these circumstances! Contact an authorized Mercedes-Benz Center or call Roadside Assistance. Incorrect wheel bolts or improperly tightened wheel bolts can cause the wheel to come off. This could cause an accident. Be sure to use the correct wheel bolts. ! Do not place wheel bolts in sand or dirt. This could result in damage to the bolt and wheel hub threads. Remove the wheel. Guide the spare wheel onto the alignment bolt and push it on. 455