2007 Mercedes S-Class Owner's Manual - Page 152

Control systems COMAND navigation (introduction) Setting map orientation: Select "Navi" "Navi" "Map Display". The map display list appears. A dot R indicates the current setting. Select "North Up" or "Heading Up". Exiting menu: Slide omp. The map orientation changes accordingly. Setting POI symbols You can set which points of interest (POIs) should be displayed as symbols in the map. POIs are garages, hotels, movie theaters or restaurants, for example. "Personal symbols" (you can determine the symbols yourself) "No symbols" Adjusting: Select "Navi" "Map Display". "Navi" i The list shows all symbols that are contained in the digital map across all states (USA) and/or provinces (CDN). Not all POIs in all states (USA) or in all provinces (CDN) are available, however. Certain POI symbols may not be displayed on the map, even if the symbol display is switched on. The map display list appears. A dot R indicates the current setting. Select "Standard symbols", "Personal symbols" or "No symbols". If you select "Personal symbols", the list of POIs appears. Switching POI symbol display on or off: Select the desired POI. The corresponding symbol displays are switched on or off, depending on the previous status. A checkmark indicates which status is active. You can switch on the symbol displays for more than one POI. Exiting menu: Slide omp or press back button L in the center console ( page 80). Geo-coordinate display i Depending on the map scale on the map, POI symbols may not be visible on the map although their display is activated. In addition, POI symbols may be covered by the map's labels. The following settings are possible: "Standard symbols" (symbol determined by the factory settings) Illustration: map with geo-coordinate display switched on 1 Current height above sea level 2 Number of GPS satellites from which signals for positioning can be received 3 Coordinate display 151