2008 Mercedes C-Class Owner's Manual - Page 422

Practical hints Where will I find ...? Opening: Pull tab 5 in direction of arrow 4 and open the vehicle tool kit cover. You can now remove the tools and accessories from vehicle tool kit 3. Closing: Store the tools and accessories in vehicle tool kit 3. Press the vehicle tool kit cover down until it engage. 1 Tab 2 Removing 3 Vehicle tool kit, jack and collapsible wheel chock 4 Opening 5 Tab 6 Luggage bowl Removing: Lift up trunk floor cover and engage trunk floor handle in upper edge of trunk. Pull tab 1 in direction of arrow 2 and lift up vehicle tool kit 3. You can now remove the vehicle tool kit 3 from luggage bowl 6. Installing: Slide the vehicle tool kit 3 into the recess in luggage bowl 6. Press vehicle tool kit 3 down until tab 1 engage in luggage bowl 6. Disengage trunk floor handle from upper edge of trunk and lower trunk floor. Vehicle jack Warning! G The jack is designed exclusively for jacking up the vehicle at the jack take-up brackets built into both sides of the vehicle. To help avoid personal injury, use the jack only to lift the vehicle during a wheel change. Never get beneath the vehicle while it is supported by the jack. Keep hands and feet away from the area under the lifted vehicle. Always firmly depress the parking brake and block wheels before raising vehicle with jack. Do not release the parking brake while the vehicle is raised. Be certain that the jack is always vertical (plumb line) when in use, especially on hills. Always try to use the jack on level surface. Make sure the jack arm is fully seated in the jack take-up bracket. Always lower the vehicle onto sufficient capacity jackstands before working under the vehicle. ! To prevent damage, always disengage trunk floor handle from trunk lid and lower trunk floor before closing the trunk. 421