2008 Mercedes C-Class Owner's Manual - Page 437
2008 Mercedes C-Class Manual
Page 437 highlights
Practical hints Replacing bulbs Front turn signal lamp bulb Place bulb socket 3 back into the lamp. Handle 2 must be in a horizontal line and mark 1 is on the upper part. Turn bulb socket 3 clockwise until it engage. Parking and standing lamp bulb Turn housing cover 2 or 3 counterclockwise and remove it. 1 Mark 2 Handle 3 Bulb socket Turn bulb socket 3 with handle 2 counterclockwise and remove it. Press gently onto the bulb and turn counterclockwise out of bulb socket 3. Press the new bulb gently into bulb socket 3 and turn clockwise until it engages. Pull out bulb socket 6 with the bulb. Pull the bulb out of the bulb socket 6. Press the new bulb into bulb socket 6. Press bulb socket 6 back into the lamp. Align housing cover 2 or 3 and turn it clockwise. Additional turn signal lamps The additional turn signal lamps in the exterior rear view mirrors have LEDs. If a malfunction occurs or LEDs fail to function, the entire turn signal unit must be replaced. Have the additional turn signal unit replaced at an authorized Mercedes-Benz Center. Front side marker lamp Since replacing the side marker lamp bulbs is a technically highly demanding process, we recommend you have the side marker lamp bulbs replaced at an authorized Mercedes-Benz Center. Replacing bulbs for rear lamps Before you start to replace a bulb for a rear lamp, do the following first: Turn the exterior lamp switch to position M ( page 108). 436