2008 Mercedes R-Class Owner's Manual - Page 303

Controls in detail Loading With the cargo compartment expanded in part ( page 292), use holders behind C-pillars 2 and the cargo tie-down rings in the third-row footwell ( page 291). With the cargo compartment fully expanded ( page 293), use holders behind B-pillars 1 and the cargo tie-down rings in the second-row footwell ( page 291). Open the hook and loop fasteners on the cargo net package. Roll out the cargo net. Unfold the cargo net. The cargo net bars must audibly engage. Cargo net installed behind the B-pillar Belt hook attached in the second-row footwell Installing the cargo net Pulling the cargo net tight 1 Holder 2 Cargo net bar Hang cargo net bar 2 on holder 1 as indicated by the arrow. Push cargo net bar 2 forward into holder 1 in direction of arrow. 1 Belt hook 2 Cargo tie-down ring 3 Tightening belt Hook belt hook 1 into cargo tie-down ring 2 in direction of arrow. Pull tightening belt 3 by the loose end in direction of arrow until the cargo net is pulled tight. After driving a short distance, make sure the cargo net is still tight and, if necessary, pull it tight again. 302