2008 Mercedes R-Class Owner's Manual - Page 502
2008 Mercedes R-Class Manual
Page 502 highlights
Practical hints Flat tire Lowering the vehicle Warning! Tighten the five wheel bolts evenly, following the diagonal sequence illustrated (1 to 5), until all bolts are tight. Observe a tightening torque of 110 lb-ft (150 Nm). Warning! G Inflate collapsible tire only after the wheel is properly mounted. Inflate the collapsible tire using the electric air pump ( page 499) before lowering the vehicle. G 1-5 Wheel bolts Vehicles with scissors-type jack: Attach ratchet to vehicle jack in such a way that the word DOWN can be seen. Lower the vehicle until it is resting fully on its own weight: Vehicles with screw-type jack: Turn crank counterclockwise. Vehicles with scissors-type jack: Turn ratchet in direction DOWN. Remove the jack. 6 Wheel wrench Have the tightening torque checked after changing a wheel. The wheels could come loose if they are not tightened to a torque of 110 lb-ft (150 Nm). Store jack and all other vehicle tool kit items back into the storage well. i The removed road wheel cannot be stored in the spare wheel well under the cargo compartment floor, but should be transported in the cargo compartment wrapped in a protective wrap. Vehicles with TPMS or Advanced TPMS*: Do not activate the tire inflation pressure monitor until a full size wheel/tire with functioning sensor has been placed back into service on the vehicle. 501