2009 Mercedes SLR McLaren Owner's Manual - Page 264

Operation Tires and wheels Seating capacity The seating capacity gives you important information on the number of occupants that can be in the vehicle. The Tire and Loading Information placard showing the seating capacity is located on the driver's door B-pillar ( page 263). i Data shown on Tire and Loading Information 1 Load limit information on the Tire and Loading Information placard The Tire and Loading Information placard showing the load limit information is located on the driver's door B-pillar. Locate the statement "The combined weight of occupants and cargo should never exceed XXX kilograms or XXX lbs." on this Tire and Loading Information placard. The combined weight of all occupants, cargo/luggage and trailer tongue load (if applicable) should never exceed the weight referenced in that statement. placard example are for illustration purposes only. Seating data are specific to each vehicle and may vary from data shown in the illustrations below. Refer to Tire and Loading Information placard on vehicle for actual data specific to your vehicle. 1 Seating capacity on the Tire and Loading Information placard Steps for determining correct load limit The following steps have been developed as required of all manufacturers under Title 49, Code of U.S. Federal Regulations, Part 575 pursuant to the "National Traffic and Motor Vehicle Safety Act of 1966". Step 1 Locate the statement "The combined weight of occupants and cargo should never exceed XXX kg or XXX lbs." on your vehicle's Tire and Loading Information placard. 264