2009 Mercury Milan Owner Guide 2nd Printing - Page 306
2009 Mercury Milan Manual
Page 306 highlights
306 Item Power transfer unit (PTU) fluid (AWD)5 Windshield washer fluid Fuel tank (FWD) Fuel tank (AWD) 1 Capacity 12 ounces (0.35L) 4.75 quarts (4.5L) - - - 17.5 gallons (66.2L) 16.5 gallons (62.4L) - ZC-32-A / WSB-M8B16-A2 Motorcraft SAE 75W-140 Synthetic Rear Axle Lubricant Motorcraft Premium Windshield Washer Concentrate XY-75W140-QL / WSL-M2C192-A 2009 Milan (mln) Owners Guide, 2nd Printing USA (fus) Ford part name Ford part number / Ford specification Add the coolant type originally equipped in your vehicle. Use of synthetic or synthetic blend motor oil is not mandatory. Engine oil need only meet the requirements of Ford specification WSS-M2C930-A and the API Certification mark. Service refill capacity is determined by filling the transmission within 3/8 inch (10mm) of the bottom of the filler hole with the vehicle on a level surface. Indicates only approximate dry-fill capacity. Some applications may vary based on cooler size and if equipped with an in-tank cooler. The amount of transmission fluid and fluid level should be set by the indication on the dipstick's normal operating range. The Power Transfer Unit is lubricated for life with synthetic lube. Lubricant levels are not to be checked or changed unless a leak is suspected or repair required. Replace Power Transfer Unit lubricant with specified synthetic lubricant anytime the unit is submerged in water. See your authorized dealer for fluid level checking or filling of the Power Transfer Unit. 5 4 3 Maintenance and Specifications 2