2009 Mercury Milan Owner Guide 2nd Printing - Page 65

Lights 4. Remove the air tube from the air filter assembly (Driver side only). 5. Remove screw from oval splash shield access panel from the exterior wheel well area. Lift up and rearward to release a hidden finger attachment at the lower portion of the panel (Passenger side only). 6. From the exterior wheel well area, reach arm through splash shield opening to access bulb socket (Passenger side only). 7. Remove the bulb socket by rotating it counterclockwise, then pulling it out of the lamp assembly. 8. Let go of the bulb socket and let the bulb socket dangle downward near the lamp housing (Passenger side only). 9. Reach over the front bolster in the engine area and, with a tool if necessary, bring the bulb socket upwards into an unobstructed area to replace the bulb (Passenger side only). 10. Carefully pull bulb straight out of socket and push in the new one. 11. After the new bulb is installed, carefully let the bulb socket dangle downward near the lamp housing (Passenger side only). 65 2009 Milan (mln) Owners Guide, 2nd Printing USA (fus)