2009 Mercury Milan Owner Guide 2nd Printing - Page 52

Climate Controls • To reduce humidity build up inside the vehicle, do not drive with the system OFF, or with recirculated air engaged and A/C off. • Do not put objects under the front seats that will interfere with the airflow to the back seats. • Remove any snow, ice or leaves from the air intake area at the base of the windshield. • To improve the A/C cool down, drive with the windows slightly open for 2-3 minutes after start up or until the vehicle has been "aired out." During extreme high ambient temperatures when idling stationary for extended periods of time in gear, it is recommended to run the A/C in the MAX A/C mode, reduce blower fan speed from the highest setting and put the vehicle's transmission into the PARK gear position (automatic transmission only) to continue to receive cool air from your A/C system. • For maximum cooling performance (MAX A/C): Automatic operation: • Press AUTO for full automatic operation. • Do not override A/C or (recirculated air). • Set the temperature to 60°F (16°C). Override operation: • Select air distribution. (recirculated air). Use (recirculated air) with • Select A/C and A/C to provide colder airflow. • Set the temperature to 60°F (16°C). • Set highest fan speed initially, then adjust to maintain comfort. In MAX A/C setting: • Adjust the temperature control to full cold. • Set highest fan speed initially, then adjust to maintain comfort. In (panel) or (panel/floor) modes: • Adjust the temperature control to full cold. (recirculated air). Use recirculated air with A/C to • Select A/C and provide colder airflow. • Set highest fan speed initially, then adjust to maintain comfort. 52 2009 Milan (mln) Owners Guide, 2nd Printing USA (fus)