2011 Mercury Milan Owner Guide 1st Printing - Page 306

Maintenance and Specifications Allow the vehicle to sit for at least eight hours without starting the engine. Then, start the engine and complete the above driving cycle. The engine must warm up to its normal operating temperature. Once started, do not turn off the engine until the above driving cycle is complete. If the vehicle is still not ready for I/M testing, the above driving cycle will have to be repeated. BRAKE/CLUTCH FLUID Brake and clutch (if equipped) systems are supplied from the same reservoir. • 2.5L engine MAX MIN • 3.0L engine The fluid level will drop slowly as the brakes wear, and will rise when the brake components are replaced. Fluid levels between the MIN and MAX lines are within the normal operating range; there is no need to add fluid. If the fluid levels are outside of the normal operating range, the performance of the system could be compromised; seek service from your authorized dealer immediately. 306 2011 Milan (mln) Owners Guide, 1st Printing USA (fus)