2011 Mercury Milan Owner Guide 1st Printing - Page 95
2011 Mercury Milan Manual
Page 95 highlights
Locks and Security Note: For all vehicles, the number of MYKEY(S) PROGRAMMED or ADMIN KEYS PROGRAMMED that is displayed in the MyKey™ system status menus will include the remote start system as an additional key in the total count. See the Check MyKey™ system status section. Note: For all vehicles with remote start installed, it is possible to program all 'real' keys as MyKeys™, in which case, you will need to use your remote start system to reset all MyKeys™ as admin keys by doing the following: 1. Enter the vehicle, close all doors. 2. Remote start the vehicle using your remote start fob. 3. Follow Steps 1-4 in the Clear MyKey™ section. Troubleshooting Potential Causes • Key in the ignition is already a MyKey™. • Key in the ignition is the last remaining admin key (there always has to be at least one admin key). •SecuriLock Passive Anti-Theft System is disabled or in unlimited mode • Vehicle has been started using a remote start system that is programmed as MyKey™. Refer to Using MyKey™ with remote start systems section. Cannot program the • Key in the ignition is a MyKey™ MyKey™ optional • No MyKeys™ are programmed to the settings vehicle. Refer to Create a MyKey™ section • Vehicle has been started using a remote start system that is programmed as a MyKey™. Refer to Using MyKey™ with remote start systems section. Cannot clear MyKey™ • Key in the ignition is a MyKey™ • No MyKeys™ are programmed to the vehicle. Refer to Create a MyKey™ section • Vehicle has been started using a remote start system that is programmed as a MyKey™. Refer to MyKey™ with remote start systems section. Lost the only admin key • Purchase a new key from your authorized dealer 95 Condition Can't create a MyKey™ 2011 Milan (mln) Owners Guide, 1st Printing USA (fus)
![](/manual_guide/autos/Mercury-2011-Milan-Owner-Guide-1st-Printing-f33eb3/95.png)