2000 Nissan Altima Owner's Manual - Page 190
2000 Nissan Altima Manual
Page 190 highlights
If the vehicle front body has been repaired and/or the headlight assembly has been replaced, check aiming. Use the aiming chart shown in the illustration. ● Basic illuminating area should be within the range shown. Adjust headlamps accordingly. FRONT PARKING AND CORNERING LAMP Replacing the front parking and cornering lamp bulb 1. Disconnect the negative (-) battery cable. FRONT TURN SIGNAL LAMP Replacing the front turn signal lamp bulb 1. Disconnect the negative (-) battery cable. 2. Reach between the grille and radiator to access the turn signal bulb socket. 3. Rotate the socket counter-clockwise and pull it out of the headlamp assembly. Do not shake the bulb socket when removing it. 4. Pull the bulb out of the socket. 5. Follow the instructions in reverse order to install new bulb. LDI0009 2. Remove the four screws from the bottom of the front fender protector (see above illustration) and position the fender protector aside to allow access to the headlamp mounting fasteners. Do-it-yourself 8-27