2001 Nissan Xterra Owner's Manual - Page 34

INSTALLATION ON REAR SEAT OUTBOARD POSITIONS Front facing WARNING The three-point belt in your vehicle is equipped with an automatic locking mode retractor which must be used when installing a child restraint. Failure to use the retractor's locking mode will result in the child restraint not being properly secured. The seat could tip over or otherwise be unsecured and cause injury to the child in a sudden stop or collision. ARS1175 ARS1176 4. Before placing the child in the child restraint, use force to tilt the child restraint from side to side, and tug it forward to make sure it is securely in place. 5. If it is not secure, try to tighten the belt again, or put the restraint in another seat. 6. Check to make sure the child restraint is properly secured prior to each use. When you install a child restraint in a rear outboard seat, follow these steps: 1. Position the child restraint on the seat. Always follow the restraint manufacturer's instructions. Seats, restraints and supplemental air bag systems 1-27