2001 Nissan Xterra Owner's Manual - Page 56
2001 Nissan Xterra Manual
Page 56 highlights
activated even if the windows are open.) 2. Remove the key from the ignition switch. 3. Close the hood and all the doors. The doors can be locked using the key, power door switch or multi-remote controller. Multi-remote controller operation: Push the LOCK button on the multiremote controller. All doors lock. The hazard lights flash twice and the horn beeps once to indicate all doors are locked. When the LOCK button is pushed with all doors locked, the hazard lights flash twice and the horn beeps once as a reminder that the doors are already locked. The horn may or may not beep once. Refer to ''Silencing the horn beep feature'' later in this section. If a door is open and you push the LOCK button the doors lock but the horn does not chirp and the hazard lights do not flash. 4. Confirm that the SECURITY indicator light comes on. The SECURITY light glows for about 30 seconds and then begins to flash once every three seconds. The system is now activated. If, during this 30 second time period, a door is unlocked by the key or the multi-remote controller, or the ignition key is turned to ACC or ON, the system will not activate. If the key is turned slowly when locking the door, the system may not activate. Furthermore, if the key is turned excessively to the unlock position, the system may be deactivated when the key is removed. If the indicator light fails to glow for 30 seconds, unlock the door once and lock it again. Even when the driver and/or passengers are in the vehicle, the system will activate with all doors and hood closed and locked and with the ignition key in the OFF position. Turn the ignition key to ACC or ON to turn the system off. The vehicle security system is NOT activated if one of the following occurs: A door is unlocked or the ignition key is turned to the ACC or ON position during the 30 seconds in which the SECURITY light stays on. Instruments and controls 2-13 LIC0053 How to activate the vehicle security system 1. Close all windows. (The system can be