2004 Nissan Quest Owner's Manual - Page 67
2004 Nissan Quest Manual
Page 67 highlights
7. Check to make sure that the child restraint is properly secured prior to each use. If the belt is not locked, repeat steps 3 through 6. After the child restraint is removed and the seat belt fully retracted, the automatic locking mode (child restraint mode) is canceled. WRS0254 WRS0295 Rear Facing - step 5 5. Before placing the child in the child restraint, use force to tilt the child restraint from side to side, and tug it forward to make sure that it is securely held in place. It should not move more than 1 inch (25mm). 6. Check that the retractor is in the automatic locking mode by trying to pull more seat belt out of the retractor. If you cannot pull any more seat belt webbing out of the retractor, the retractor is in the automatic locking mode. LATCH anchor point label (2nd row captain's chairs) LATCH (Lower Anchors and Tethers for CHildren) SYSTEM Safety-Seats, seat belts and supplemental air bags 1-51