2007 Nissan 350Z Owner's Manual - Page 128

¼ The foot brake pedal is released. ¼ The passenger power seat switch (on the cushion or the seatback) is operated. Remove your hand from the soft top operating switch, and push the switch again to move the top to the fully opened or closed position. The soft top indicator light will turn off when the top open operation is completely finished. When closing the top, the light, which is illuminated, will begin to flash when the top close operation is completely finished. Securely engage the top to the vehicle body by operating the top latch lever. The light will turn off. If the soft top indicator light flashes with the ignition switch ON (whether the top is operated or not, and when the top is engaged), it may indicate the top operating system is not functioning properly. Have your vehicle checked by a NISSAN dealer as soon as possible. top operation is completed. This automatic seatback movement will be stopped: ¼ When the passenger seat sliding or reclining switch (on the seat cushion) is operated. ¼ When the power seatback tilt switch (on the seatback) is operated. ¼ When the seatback tilt cancel switch is turned to the CANCEL position. Remove your hand from the soft top operating switch, and push it again to resume operation. The passenger seatback will start tilting forward again from the present position, and the soft top will start opening or closing. If the top movement is interrupted at this time, the next time you resume top operation, the seatback will first tilt forward from the present position, then the top will start moving again. If you need to cancel this function or when a child restraint is installed in the passenger seat, push the seatback tilt cancel switch to the CANCEL position. For the seatback tilt cancel switch, see "Tilting and reclining passenger's seat from driver's seat" in the "1. Safety - Seats, seat belts and supplemental restrain system" section. If the seatback tilt cancel switch is in the CANPre-driving checks and adjustments SPA1691 Soft top indicator light The soft top indicator light in the instrument panel shows the conditions of top operation. The light illuminates when the soft top is being operated or if it is stopped before reaching the fully opened or closed position. When the top is fully opened, the light will turn off. When the top is fully closed, the light will flash. When the soft top is in motion, and any of the following conditions occur, the top will stop moving: ¼ The vehicle is moved. ¼ The ignition switch is turned to OFF. Automatic passenger seatback tilt function The passenger seatback will automatically tilt forward when the soft top is operated. This function is designed to draw your passenger's attention to the rear section of the top, which will come into the passenger compartment from behind during the top operation. The seatback will return to the original position when the entire 3-17