2007 Nissan Murano Owner's Manual - Page 277

CVT FLUID around the oil filter. Correct as required. 10. Turn the engine off and wait several minutes. Check the oil level. Add engine oil if necessary. Contact a NISSAN dealer if checking or replacement is required. POWER STEERING FLUID CAUTION ¼ Use only Genuine NISSAN CVT Fluid NS-2. Do not mix with other fluids. ¼ Using transmission fluid other than Genuine NISSAN CVT Fluid NS-2 will damage the CVT transmission, which is not covered by the NISSAN new vehicle limited warranty. SDI1765A The specified CVT fluid is also described on caution labels located in the engine compartment. Check the fluid level in the reservoir tank. The fluid level should be checked using the HOT 1 2 range (k : HOT MAX., k : HOT MIN.) at fluid temperatures of 122 to 176°F (50 to 80°C) or 3 4 using the COLD range (k : COLD MAX., k : COLD MIN.) at fluid temperatures of 32 to 86°F (0 to 30°C). CAUTION ¼ Do not overfill. ¼ Use Genuine NISSAN PSF or equiva- 8-12 Maintenance and do-it-yourself