2007 Nissan Murano Owner's Manual - Page 283
2007 Nissan Murano Manual
Page 283 highlights
WINDSHIELD WIPER BLADES CAUTION ¼ After wiper blade replacement, return the wiper arm to its original position. Otherwise it may be damaged when the engine hood is opened. ¼ Make sure the wiper blade contact the glass, otherwise the arms may be damaged from wind pressure. ¼ Worn windshield wiper blades can damage the windshield and impair driver vision. rinse the blade with clear water. If your windshield is still not clear after cleaning the blades and using the wiper, replace the blades. SDI1503 REPLACING Replace the wiper blades if they are worn. 1. Turn the ignition switch to the ON position and the windshield wiper switch ON. Turn the ignition switch OFF when the wiper is in the fully up position. The wiper will stop as illustrated. The wiper should be in the fully up position to avoid scratching the engine hood or wiper arm. 2. Pull the wiper arm up. Hold the wiper arm to avoid hitting the CLEANING If your windshield is not clear after using the windshield washer or if a wiper blade chatters when running, wax or other material may be on the blade or windshield. Clean the outside of the windshield with a washer solution or a mild detergent. Your windshield is clean if beads do not form when rinsing with clear water. Clean the blade by wiping it with a cloth soaked in a washer solution or a mild detergent. Then 8-18 Maintenance and do-it-yourself