2009 Nissan GT-R Owner's Manual - Page 196
2009 Nissan GT-R Manual
Page 196 highlights
VDC, TRANSMISSION AND SUSPENSION SETUP SWITCHES serious injury. P & position, the vehicle may start moving due to partial engagement of the clutch or to the effects of gravity on a slope, or the vehicle may suddenly accelerate due to accidental operation of the accelerator pedal, possibly causing an accident. NOTICE When the vehicle is stopped on a hill, do not hold the vehicle in place by depressing the accelerator pedal. Doing so may cause the clutch to overheat and result in transmission damage. Use the brakes to prevent the vehicle from moving. When parking the vehicle 1. Bring the vehicle to a complete stop. 2. With the foot brake pedal depressed, apply the parking brake. P 3. Move the shift lever to the & position. 4. Check the shift lever position indicator on P the instrument panel to confirm that the & position is selected. 5. Push the ignition switch to stop the engine. The control of the dual clutch transmission, Bilstein DampTronic® electronically controlled shock absorbers and Vehicle Dynamic Control (VDC) can be changed to the desired modes by operating the setup switches. Select the desired mode best suited to the driving conditions. NOTE: Bilstein DampTronic® is a registered trademark of ThyssenKrupp Bilstein Suspension GmbH. WARNING Before exiting the vehicle, be sure to P move the shift lever to the & position and stop the engine. If the engine is running and the shift lever is not in the Starting and driving 5-21