2009 Nissan GT-R Owner's Manual - Page 48

Top tether anchor point locations Anchor points are located on the rear parcel shelf. CHILD RESTRAINT INSTALLATION USING LATCH Installing top tether strap First, secure the child restraint with the LATCH system (rear bench outboard seating positions only) or the seat belt, as applicable. Flip up the anchor cover from the anchor point which is located directly behind the child seat. Position the top tether strap over the top of the seatback and secure it to the tether anchor bracket that provides the straightest installation. Tighten the strap according to the manufacturer's instructions to remove any slack. If you have any questions when installing a top tether strap child restraint on the rear seat, consult your GT-R certified NISSAN dealer for details. WARNING . Attach LATCH compatible child restraints only at the locations shown. If a child restraint is not secured properly, your child could be seriously injured or killed in an acci"Lower Anchors and dent. ( Tethers for CHildren SYSTEM (LATCH)" page 1-15) The LATCH anchors are designed to withstand only those loads imposed by correctly fitted child restraints. Under no circumstance are they to be used for adult seat belts or harnesses. Inspect the lower anchors by inserting your fingers into the lower anchor area and feeling to make sure there are no obstructions over the LATCH anchors, such as seat belt webbing or seat cushion material. The child restraint will not be secured properly if the LATCH anchors are obstructed. Front facing - step 2 . Front-facing Follow these steps to install a front-facing child restraint using LATCH: 1. Position the child restraint on the seat. Always follow the child restraint manufacturer's instructions. . Safety - Seats, seat belts and supplemental restraint system 1-17