2009 Nissan GT-R Owner's Manual - Page 256

DRIVE BELTS JUMP STARTING If jump starting is necessary, see the following section. ( "JUMP STARTING" page 6-3) If the engine does not start by jump starting, the battery may have to be replaced. Contact a GT-R certified NISSAN dealer. 1. Remove the cell plugs A *. 2. Add distilled water up to the UPPER LEVEL 1 * line. If the side of the battery is not clear, check the distilled water level by looking directly 1 above the cell; the condition * indicates 2 OK and the conditions * needs more to be added. 3. Tighten cell plugs A *. 1. 2. 3. 4. 5. Power steering fluid pump Alternator Crankshaft pulley Air conditioner compressor Drive belt auto-tensioner WARNING Be sure the ignition switch is in the OFF or LOCK position before servicing drive belts. The engine could rotate unexpectedly. 1. Visually inspect each belt for signs of unusual wear, cuts, fraying or looseness. If the belt is in poor condition or loose, have it Maintenance and do-it-yourself 8-17 Vehicles operated in high temperatures or under severe conditions require frequent checks of the battery fluid level.