2009 Nissan Murano Owner's Manual - Page 104
2009 Nissan Murano Manual
Page 104 highlights
or When the headlight switch is in the position while the ignition switch is in the ON position, the lights will automatically turn off 5 minutes after the ignition switch has been pushed to the OFF position. When the headlight switch remains in the or position after the lights automatically turn off, the lights will turn on when the ignition switch is pushed to the ON position. CAUTION . SIC3670 Headlight beam select 1 * 2 * To select the low beam, put the lever in the neutral position as shown. To select the high beam, push the lever forward while the switch is in the position. Pull it back to select the low beam. Pulling the lever toward you will flash the headlight high beam even when the headlight switch is in the OFF position. When you turn on the headlight switch again after the lights automatically turn off, the lights will not turn off automatically. Be sure to turn the light switch to the OFF position when you leave the vehicle for extended periods of time, otherwise the battery will be discharged. Never leave the light switch on when the engine is not running for extended periods of time even if the headlights turn off automatically. SIC2275 Headlight aiming control (if so equipped) Depending on the number of occupants in the vehicle and the load it is carrying, the headlight axis may be higher than desired. If the vehicle is traveling on a hilly road, the headlights may directly hit the rearview mirror of the vehicle ahead or the windshield of the oncoming vehicle. The light axis can be lowered with the operation of the switch. The larger the number designated on the switch, the lower the axis. When traveling with no heavy load or on a flat road, select position 0. . 3 * Battery saver system A chime will sound when the driver side door is or opened with the light switch in the position and the ignition switch in the ACC, OFF or LOCK position. 2-34 Instruments and controls