2009 Nissan Murano Owner's Manual - Page 40

tacts the top tether strap may damage the top tether strap during a collision. 4. Tighten the tether strap according to the manufacturer's instructions to remove any slack. If you have any questions when installing a top tether strap child restraint on the rear seat, consult your NISSAN dealer for details. CHILD RESTRAINT INSTALLATION USING LATCH WARNING SSS0822 . Top tether anchor point locations Anchor points are located on the seatbacks. Installing top tether strap First secure the child restraint with the LATCH system (rear outboard seating positions only) or the seat belt as applicable. 1. Remove the head restraint from the seatback. Store it in a secure place. 2. Position the top tether strap over the top of the seatback. 3. Secure the tether strap to the tether anchor bracket that provides the straightest installation. . Attach LATCH compatible child restraints only at the locations shown. For the LATCH lower anchor locations, see "Lower Anchors and Tethers for CHildren SYSTEM (LATCH)" earlier in this section. If a child restraint is not secured properly, your child could be seriously injured or killed in an accident. The LATCH anchors are designed to withstand only those loads imposed by correctly fitted child restraints. Under no circumstance are they to be used for adult seat belts or harnesses. Inspect the lower anchors by insert- . 1-26 Safety - Seats, seat belts and supplemental restraint system