2009 Nissan Titan Crew Cab Owner's Manual - Page 183

Cooling This mode is used to cool and dehumidify the air. 1. Push the 2. Press the button to the OFF position. air flow control button. 3. Turn the fan control dial to the desired position. 4. Push the light on the button on. The indicator button will come on. 3. Turn the fan control dial to the desired position. 4. Push the on the button. The indicator light button will come on. 5. Turn the temperature control dial to the desired position. ● If the engine coolant temperature gauge indicates engine coolant temperature over the normal range, turn the air conditioner off. See "If your vehicle overheats" in the "In case of emergency" section of this manual. Operating tips ● Keep the windows closed while the air conditioner is in operation. ● After parking in the sun, drive for 2 or 3 minutes with the windows open to vent hot air from the passenger compartment. Then, close the windows. This allows the air conditioner to cool the interior more quickly. ● The air conditioning system should be operated for approximately 10 minutes at least once a month. This helps prevent damage to the system due to lack of lubrication. ● A visible mist may be seen coming from the ventilators in hot, humid conditions as the air is cooled rapidly. This does not indicate a malfunction. AIR FLOW CHARTS The following charts show the button and dial positions for MAXIMUM AND QUICK heating, cooling or defrosting. For additional information on heating and cooling see "Heater and air conditioner" in this section. The air recirculation ( ) button should always be in the OFF position for heating and defrosting. 5. Turn the temperature control dial to the desired position. ● For quick cooling when the outside temperature is high, push the button to the ON position. The indicator light on the button will come on. Be sure to return the to the OFF position for normal cooling. The indicator light on the button will go off. You may also select MAX A/C for quick cooling. Dehumidified heating This mode is used to heat and dehumidify the air. 1. Push the button to the OFF position. The indicator light on the button will go off. 2. Press the air flow control button. Display screen, heater, air conditioner, audio and phone systems 4-17