2009 Nissan Titan Crew Cab Owner's Manual - Page 189

● When the position is selected, the air conditioner automatically turns on (however, button will not the indicator light on the come on) if the outside temperature is more than 36°F (2°C). If in defrost mode for more than one minute, the air conditioning system will continue to operate until the vehicle is shut off, or the A/C button is used to turn off the compressor even if the air flow control dial is turned to a position other than the position. This dehumidifies the air which helps defog the windshield. The mode automatically turns off, allowing outside air to be drawn into the passenger compartment to further improve the defogging performance. Heating and defogging This mode heats the interior and defogs the windshield. 1. Turn the air flow control dial to the position. 2. Turn the fan control dial to the desired position. 3. Turn the temperature control dial to the desired position between the middle and the hot position. ● When the position is selected, the air conditioner automatically turns on (however, the indicator light on the button will not come on and A/C will not appear on the display, if so equipped) if the outside temperature is more than 36°F (2°C). If in defrost mode for more than one minute, the air conditioning system will continue to operate until the vehicle is shut off, or the A/C button is used to turn off the compressor even if the air flow control dial is turned to a position position. This dehuother than the midifies the air which helps defog the windshield. The mode automatically turns off, allowing outside air to be drawn into the passenger compartment to further improve the defogging performance. Operating tips Clear snow and ice from the wiper blades and air inlet in front of the windshield. This improves heater operation. AIR CONDITIONER OPERATION Start the engine, turn the fan control dial to the desired position, and push in the button to activate the air conditioner. When the air conditioner is on, cooling and dehumidifying functions are added to the heater operation. The air conditioner cooling function operates only when the engine is running. Bi-level heating The bi-level mode directs warmed air to the side and center vents and to the front and rear floor outlets. 1. Push the button to the OFF position. The indicator light on the button will go off. ( will appear on the display, if so equipped.) 2. Turn the air flow control dial to the position. 3. Turn the fan control dial to the desired position. 4. Turn the temperature control dial to the desired position. Cooling This mode is used to cool and dehumidify the air. 1. Push the button to the OFF position. 2. Turn the air flow control dial to the position. 3. Turn the fan control dial to the desired position. 4. Push the button. The indicator light on the button will come on. (A/C will appear on the display, if so equipped.) 5. Turn the temperature control dial to the desired position. Display screen, heater, air conditioner, audio and phone systems 4-23