2010 Nissan Maxima Owner's Manual - Page 105

WIC1412 WIC1439 WIC1440 INSTRUMENT BRIGHTNESS CONTROL The instrument cluster illuminates when the ignition switch is in the ON position. The instrument brightness control operates when the headlight control switch is in the or position. AUTO, Turn the control left or right to adjust the brightness of the instrument panel lights when driving at night. The instrument brightness control will not adjust the brightness when the headlights or parking lights are off. TURN SIGNAL SWITCH Turn signal 1 FOG LIGHT SWITCH (if so equipped) To turn the fog lights on, turn the headlight switch position, then turn the fog light to the switch to the position. To turn the fog lights on with the headlight switch in the AUTO position, the headlights must be on, then position. turn the fog light switch to the To turn the fog lights off, turn the fog light switch to the OFF position. The headlights must be on and the low beams selected for the fog lights to operate. The fog lights automatically turn off when the high beam headlights are selected. Move the lever up or down to signal the turning direction. When the turn is completed, the turn signals cancel automatically. Lane change signal 2 To signal a lane change, move the lever up or down to the point where the indicator light begins to flash, but the lever does not latch. 2-32 Instruments and controls