2013 Nissan Leaf Owner's Manual - Page 236

1. Push the AUTO button. The AUTO indicator will illuminate. 2. If the A/C indicator light does not illuminate, push the A/C button. The A/C indicator light will illuminate. 3. If the HEAT indicator light does not illuminate, press the HEAT button. The HEAT indicator light will illuminate. 4. Turn the temperature control dial to set the desired temperature. The temperature range is between 60°F (18°C) and 90°F (32°C). 5. To set the automatic control mode, press and hold the (intake air control) button. The indicator will blink twice and inside/outside circulation will switch automatically. A visible mist may be seen coming from the ventilators in hot, humid conditions as the air is cooled rapidly. This does not indicate a malfunction. Heating (A/C off): 1. Push the AUTO button. The AUTO indicator will illuminate. 2. Press the HEAT button. The indicator light on the HEAT button will come on. If the indicator light on the A/C button remains on, press the A/C button so that the indicator light turns off. 3. If the A/C indicator light illuminates, push the A/C button. The A/C indicator light will turn off. 4. Turn the temperature control dial to set the desired temperature. The temperature range is between 60°F (16°C) and 90°F (32°C). • Do not set the temperature lower than the outside air temperature. Doing so may prevent the temperature from being controlled properly. • If the windows fog up, use dehumidified heating instead of the A/C off heating. Dehumidified defrosting/defogging: 1. Push the front defroster button. (The indicator light will illuminate.) 2. Turn the temperature control dial to set the desired temperature. • To remove moisture or fog on the front window quickly, set the temperature to the high temperature and the fan speed to their maximum level. • After the windshield is cleared, push the front defroster button again. (The indicator light will turn off.) button is • When the front defroster pushed, the air conditioner will automatically turn on to defog the windshield. The outside air circulation mode will be selected to improve the defogging performance. Manual operation The manual mode can be used to control the heater and air conditioner to your desired settings. To turn off the heater and air conditioner, push the A/C-Heater ON·OFF button. Fan speed control: Turn the fan speed control dial to increase the fan speed. clockwise Turn the fan speed control dial counterclockwise to decrease the fan speed. Push the AUTO button to change the fan speed to the automatic mode. Heater, air conditioner, audio and phone systems 4-11