2013 Nissan Titan Crew Cab Owner's Manual - Page 166

3. Hold the tailgate at a 45 degree angle. 4. Pull the tailgate out from the left side hinge. 5. Slide the tailgate out of the right side hinge. Installing the tailgate 1. Insert the tailgate into the right side hinge. 2. Hold the tailgate at a 45 degree angle and insert into the left side hinge. 3. Continue to hold the tailgate at a 45 degree angle and attach the tailgate support cables. LPD0271 Removing the tailgate 1. Disconnect the wiring harness for the rear camera (if so equipped). See "Disconnecting the rear camera" in this section. 2. Release the tailgate support cables. 4. For vehicles with rear camera: Be sure the tailgate harness is not hanging below the tailgate and keep the tailgate open . See "Connecting the rear camera" in this section before closing the tailgate. 5. For vehicles without rear camera: Close the tailgate securely. CAUTION ● The tailgate is heavy. Two people should remove or install it. Be careful not to drop it during removal. ● After releasing the support cables, do not let the tailgate rest on the bumper. Pre-driving checks and adjustments 3-23