2013 Nissan Titan Crew Cab Owner's Manual - Page 192

Dehumidified heating This mode is used to heat and dehumidify the air. 1. Press the button to the OFF position. The indicator light on the button will go off. 2. Press the air flow control button. ● A visible mist may be seen coming from the ventilators in hot, humid conditions as the air is cooled rapidly. This does not indicate a malfunction. ● If the engine coolant temperature gauge indicates engine coolant temperature over the normal range, turn the air conditioner off. See "If your vehicle overheats" in the "In case of emergency" section of this manual. 3. Turn the fan control dial to the desired position. 4. Press the light on the button on. The indicator button will come on. AIR FLOW CHARTS The following charts show the button and dial positions for MAXIMUM AND QUICK heating, cooling or defrosting. For additional information on heating and cooling see "Heater and air conditioner" in this section. The air recirculation ) button should always be in the OFF ( position for heating and defrosting. 5. Turn the temperature control dial to the desired position. Operating tips ● Keep the windows closed while the air conditioner is in operation. ● After parking in the sun, drive for 2 or 3 minutes with the windows open to vent hot air from the passenger compartment. Then, close the windows. This allows the air conditioner to cool the interior more quickly. ● The air conditioning system should be operated for approximately 10 minutes at least once a month. This helps prevent damage to the system due to lack of lubrication. Monitor, climate, audio, phone and voice recognition systems 4-21