2013 Nissan Titan Crew Cab Owner's Manual - Page 235

While connected to the vehicle, the iPodா can only be operated by the vehicle audio controls. To disconnect the iPodா from the vehicle, remove the USB end of the cable from the USB jack on the vehicle, then remove the cable from the iPodா. * iPodா is a trademark of Apple Inc., registered in the U.S. and other countries. ● iPodா Nano - 5th generation (firmware version 1.0.1 or later) * Some features of this iPodா may not be fully functional. Make sure that your iPodா firmware is updated to the version indicated above. Compatibility The following models are compatible: LHA2455 ● iPodா 5th Generation (firmware version 1.2.3 or later) ● iPodா Classic (firmware version 1.1.1 or later) ● iPodா Touch (firmware version 2.0.0 or later)* ● iPodா Nano - 1st generation (firmware version 1.3.1 or later) ● iPodா Nano - 2nd generation (firmware version 1.1.3 or later) ● iPodா Nano - 3rd generation (firmware version 1.1.3 or later) ● iPodா Nano - 4th generation (firmware version 1.0.4 or later) iPodா* PLAYER OPERATION WITH NAVIGATION SYSTEM (if so equipped) Connecting iPodா To connect an iPodா to the vehicle so that the iPodா can be controlled with the audio system controls and display screen, use the USB jack located in the center console. Connect the iPodா-specific end of the cable to the iPodா and the USB end of the cable to the USB jack on the vehicle. If your iPodா supports charging via a USB connection, its battery will be charged while connected to the vehicle with the ignition switch in the ACC or ON position. 4-64 Monitor, climate, audio, phone and voice recognition systems