2014 Nissan Altima Owner's Manual - Page 157

REMOTE ENGINE START (if so equipped) ● Vehicles with an automatic climate control system will default to either a heating or cooling mode depending on outside and cabin temperatures. See "Remote start logic" in the "Monitor, climate, audio, phone and voice recognition systems" section for more information. ● Vehicle equipped with heated seats may have this feature come on during a remote start. See "Heated seats" in the "Instruments and controls" section for more information. Laws in some local communities may restrict the use of remote starters. For example, some laws require a person using remote start to have the vehicle in view. Check local regulations for any requirements. Other conditions may affect the function of the Remote Engine Start feature. See "Conditions the remote start will not work" in this section for additional information. Other conditions can affect the performance of the Intelligent Key transmitter. See "NISSAN Intelligent Key® System" in this section for additional information. REMOTE ENGINE START OPERATING RANGE The remote engine start function can only be used when the Intelligent Key is within the specified operating range from the vehicle. When the Intelligent Key battery is discharged or strong radio waves are present near the operating location, the Intelligent Key operating range becomes narrower, and the Intelligent Key may not function properly. The remote engine start operating range is approximately 197 ft (60 m) from the vehicle. LPD2078 REMOTE STARTING THE VEHICLE To use the remote start feature to start the engine perform the following: 1. Aim the Intelligent Key at the vehicle. 2. Press the doors. LOCK button to lock all The button will be on the NISSAN Intelligent Key® if the vehicle has remote engine start. This feature allows the engine to start from outside the vehicle. The following features may be affected when the remote start feature is used: ● Vehicles with a manual climate control system will default to the last used heating or cooling mode. 3. Within 5 seconds press and hold the remote start button until the turn signal lights illuminate. If the vehicle is not within view remote start butpress and hold the ton for about 2 seconds. 3-26 Pre-driving checks and adjustments