2014 Nissan Altima Owner's Manual - Page 315
2014 Nissan Altima Manual
Page 315 highlights
CRUISE CONTROL (if so equipped) ● The SET indicator light may blink when the cruise control switch is turned ON while pushing the ACCEL/RES, COAST/SET, or CANCEL switch. To properly set the cruise control system, use the following procedures. WARNING Do not use the cruise control when driving under the following conditions: ● When it is not possible to keep the vehicle at a set speed. LSD2115 LSD2088 ● In heavy traffic or in traffic that varies in speed. ● On winding or hilly roads. ● On slippery roads (rain, snow, ice, etc.). ● In very windy areas. Doing so could cause a loss of vehicle control and result in an accident. CAMERA UNIT MAINTENANCE 1 for the LDW/BSW sysThe rear camera unit ᭺ tems is located above the rear licence plate. To maintain the proper operation of the LDW/BSW systems and help keep the system functioning, be sure to observe the following: 1. 2. 3. 4. CANCEL switch ACCEL/RES switch COAST/SET switch ON/OFF switch PRECAUTIONS ON CRUISE CONTROL ● If the cruise control system malfunctions, it cancels automatically. The SET indicator light in the instrument panel then blinks to warn the driver. ● If the SET indicator light blinks, turn the cruise control switch off and have the system checked by a NISSAN dealer. ● Always keep the camera unit clean. ● Do not attach "licence plate accessories" that reflect light. ● Do not strike or damage the areas around the camera unit. CRUISE CONTROL OPERATIONS The cruise control allows driving at a speed between 25 - 89 MPH (40 - 144 km/h) without keeping your foot on the accelerator pedal. To turn on the cruise control, push the ON·OFF switch on. The CRUISE indicator light in the instrument panel will illuminate. 5-26 Starting and driving