2015 Nissan Armada Owner's Manual - Page 121

For additional information about Intelligent Key, refer to "NISSAN Intelligent Key®" in the "Predriving checks and adjustments" section. Cruise main switch indicator This indicator illuminates when the cruise control main switch is pushed. The indicator turns off when the main switch is pushed again. When the cruise main switch indicator illuminates, the cruise control system is operational. Cruise set switch indicator light The light comes on while the vehicle speed is controlled by the cruise control system. If the light blinks while the engine is running, it may indicate the cruise control system is not functioning properly. Have the system checked by a NISSAN dealer. NISSAN Intelligent Key® battery discharge indicator (NISSAN Intelligent Key® model) This indicator illuminates when the Intelligent Key battery is running out of power. If this indicator illuminates, replace the battery with a new one. For additional information, refer to "Battery replacement" in the "Maintenance and do-it-yourself" section of this manual. Transfer 4LO position indicator ( model) This indicator illuminates when the 4WD shift switch is set in the 4LO position with the ignition switch placed in the ON position. If the 4WD shift switch is set in the 4LO position and the indicator blinks, stop the vehicle, drive slowly forward and the indicator will turn on. When you shift between 4H and 4LO, stop the vehicle, move the shift lever to the N (Neutral) position, then depress and turn the 4WD shift switch to 4LO or 4H. The transfer case may be damaged if you shift the switch while driving. You cannot move the transfer 4WD shift switch between 4H and 4LO unless you have first stopped the vehicle and moved the shift lever to N (Neutral). Make sure the transfer 4LO position indicator illuminates when you shift the 4WD shift switch to 4LO. The indicator may blink while shifting from one drive mode to the other. 4WD shift indicator ( model) While the engine is running, the 4WD shift indicator will illuminate the position selected by the 4WD shift switch. The 4WD shift indicator may blink while shifting from one drive mode to the other. Automatic transmission position indicator When the ignition switch is placed in the ON position, this indicator shows the shift lever position. For additional information, refer to "Driving the vehicle" in the "Starting and driving" section of this manual. Loose fuel cap warning This warning appears when the fuel-filler cap is not tightened correctly after the vehicle is refueled. For additional information, refer to "Fuelfiller cap" in the "Pre-driving checks and adjustments" section of this manual. 2-28 Instruments and controls