2015 Nissan Armada Owner's Manual - Page 231

2. Turn the driver's side temperature control dial to the left or right to set the desired temperature. Driver and passenger temperatures can be set independently. Press DUAL to activate dual climate control functions. Turn the passenger's side temperature control dial to the left or right to set the desired passenger's temperature. ● Adjust the temperature dial to about 75°F (24°C) for normal operation. ● The temperature of the passenger compartment will be maintained automatically. Air flow distribution, fan speed and A/C on/off are also controlled automatically. ● A visible mist may be seen coming from the vents in hot, humid conditions as the air is cooled rapidly. This does not indicate a malfunction. ● As soon as possible after the windshield is clean, press the AUTO button to return to the auto mode. is ● When the defroster control button activated, the air conditioner will automatically be turned on at outside temperatures above 36°F (2°C). If in defrost mode for more than 1 minute, the air conditioning system will continue to operate until the fan control is turned OFF, the vehicle is shut off, or the A/C button is pressed even if the air flow MODE control button is used to select a position. This position other than the dehumidifies the air which helps defog the windshield. The air recirculation mode automatically turns off, allowing outside air to be drawn into the passenger compartment to further improve the defogging performance. Air recirculation The mode automatically turns off, allowing outside air to be drawn into the passenger compartment to prevent fogging in defrost, floor or def/floor modes. to recirPush the air recirculation button culate interior air inside the vehicle. Push the AUTO button to return to automatic mode. Air flow control Pressing the MODE button manually controls air flow and selects the air outlet: Dehumidified defrosting or defogging 1. Press the defroster control button to turn the system on. The display will show the defrost icon. 2. Turn the temperature dial to the left or right to set the desired temperature. ● To quickly remove ice from the outside of the windows, press the fan control speed button . until it reaches the maximum speed MANUAL OPERATION Fan speed control buttons Press the fan speed control buttons to manually control the fan speed. Press OFF to turn the system off. Press the AUTO button to return to automatic control of the fan speed. +/- - Air flows from center and side vents. - Air flows from center and side vents and foot outlets. - Air flows mainly from foot outlets. - Air flows from defroster and foot outlets. - Air flows from defroster outlets. To turn system off Press the OFF button. 4-30 Monitor, climate, audio, phone and voice recognition systems