2015 Nissan Armada Owner's Manual - Page 153

When power window switch does not operate If the power window automatic function (closing only) does not operate properly, perform the following procedure to initialize the power window system: 1. Place the ignition switch in the ON position. 2. Open the window more than halfway by operating the power window switch. 3. Pull the power window switch and hold it to close the window, and then hold the switch more than 3 seconds after the window is closed. 4. Release the power window switch. Operate the window by the automatic function to confirm the initialization is complete. The power window automatically opens or closes depending on if the automatic down or up function is selected. 5. Perform steps 2 through 4 above for other windows. If the power window function does not operate properly after performing the above procedure, see a NISSAN dealer for assistance. The power vent windows operate when the ignition switch is placed in the ON position, or for a period of time after the ignition switch is placed in the OFF position. If the driver's or passenger's door is opened during this period of time, the power to the vent windows is cancelled. LIC1417 POWER VENT WINDOWS (if so equipped) Use the vent window switch located on the driver's side of the instrument panel to open and close the power vent windows. The windows cannot be operated separately. To open the power vent windows press and hold the switch. To close the windows pull up and hold the switch. 2-60 Instruments and controls