2015 Nissan Xterra Owner's Manual - Page 119

CLUTCH INTERLOCK (clutch start) SWITCH (if so equipped) ● Use the E-Lock system only when freeing a stuck vehicle. Try the 4LO position before using the E-Lock system. Never use the E-Lock system on a slippery road surface such as snow or ice surface. Using the E-Lock system when driving in these road conditions may cause unexpected movement of the vehicle during engine braking, accelerating or turning, which may result in an accident and serious personal injury. To use the clutch interlock switch: 1. Set the parking brake. 2. Depress the brake pedal with your right foot. 3. Place your left foot on the brake pedal and release the parking brake. 4. Turn the ignition switch to the ON position. 5. Press and release the clutch interlock switch. The CANCEL light on the switch will illuminate. 6. Turn the ignition to the START position to start the engine and, at the same time, depress the accelerator pedal with your right foot. As the vehicle begins to move, take your left foot off the brake. Once the engine has started, the clutch interlock switch CANCEL light shuts off. Do not use the interlock switch to start the engine under normal driving conditions. CAUTION ● After using the E-Lock system, turn the switch OFF to prevent possible damage to driveline components from extended use. ● Do not drive over 12 MPH (20 km/h) when the system is engaged. Doing so could result in possible damage to the driveline. ● Do not turn on the E-lock system while the tires are spinning. Doing so could damage drivetrain components. WIC0817 WARNING Pay special attention to your surroundings when using the clutch interlock switch. The vehicle will move forward or backward according to the gear selected. The clutch interlock (clutch start) switch allows for starting the engine without depressing the clutch pedal. This feature helps you restart the engine if it stops under difficult conditions. (For example, the engine stops on a steep hill and a slight movement forward or backward might be dangerous.) 2-36 Instruments and controls