2015 Nissan Xterra Owner's Manual - Page 62

REAR BENCH SEAT OUTBOARD SEATING POSITIONS 1. Remove the head restraint/headrest and store it in a secure place. Be sure to reinstall the head restraint/headrest when the child restraint is removed. For additional information, refer to "Head restraints/headrests" in this section for headrestraint/headrest adjustment, removal and installation information. 1 over the 2. Position the top tether strap ᭺ seatback. WRS0475 LRS2406 Forward-facing - step 10 10. If the child restraint is installed in the front passenger seat, place the ignition switch in the ON position. The front passenger air bag should illuminate. If this status light light is not illuminated, refer to "Front passenger air bag and status light" in this section. Move the child restraint to another seating position. Have the system checked by a NISSAN dealer. After the child restraint is removed and the seat belt is fully retracted, the ALR mode (child restraint mode) is canceled. Rear bench seat 1 1. Top tether strap ᭺ 2 2. Anchor point ᭺ 3. Secure the tether strap to the tether anchor 2 on the bottom of the seatback point ᭺ behind the child restraint. 4. Tighten the tether strap according to the manufacturer's instructions to remove any slack. CENTER SEATING POSITION 1. Remove the head restraint/headrest and store it in a secure place. Be sure to reinstall the head restraint/headrest when the child restraint is removed. For additional information, refer to "Head restraints/headrests" in this section for headrestraint/headrest adjustment, removal and installation information. INSTALLING TOP TETHER STRAP The child restraint top tether strap must be used when installing the child restraint with seatbelts. First, secure the child restraint with the seatbelt. Safety-Seats, seat belts and supplemental restraint system 1-43