2015 Nissan Xterra Owner's Manual - Page 40

Attaching the center seat belt Always be sure the center seat belt connector tongue and connector buckle are attached. Disconnect only when folding down the rear seat. To connect the buckle: E from the 1. Pull out the seat belt tongue ᭺ retractor base. F from the 2. Pull out the connector tongue᭺ molded retractor base. G and secure the receiver 3. Pull the seat belt ᭺ buckle until it clicks. WARNING ● Do not unfasten the rear center seat belt connector except when folding down the rear seat. ● When attaching the rear center seat belt connector, be certain that the seatbacks are completely secured in the latched position and the rear center seat belt connector is completely secured. ● If the rear center seat belt connector and the seatbacks are not secured in the correct position, serious personal injury may result in an accident or sudden stop. The center seat belt connector tongue and receiver buckle are indicated by the > and < mark. The center seat belt connector tongue can be attached only into the rear center seat belt connector buckle. To fasten the seat belt, for additional information, refer to "Fastening the seat belts" in this section. LRS2493 Rear center seat belt comfort guide When using the rear seat center seat belt it may be necessary to use the comfort guide to adjust the shoulder belt height for occupants of different sizes for added comfort and to help obtain proper seat belt fit. A on the 1. Raise the head restraint/headrest ᭺ rear seat driver's side seating position. ReB from the stowed move the comfort guide ᭺ position by pulling the cord from the channel. Safety-Seats, seat belts and supplemental restraint system 1-21