2015 Nissan Xterra Owner's Manual - Page 57

7. Check to make sure the child restraint is properly secured prior to each use. If the child restraint is loose, repeat steps 3 through 6. WRS0697 LRS2406 Forward-facing - step 6 6. After attaching the child restraint, test it before you place the child in it. Push it from side to side while holding the child restraint near the LATCH attachment path. The child restraint should not move more than 1 inch (25 mm), from side to side. Try to tug it forward and check to see if the LATCH attachment holds the restraint in place. If the restraint is not secure, tighten the LATCH attachment as necessary, or put the restraint in another seat and test it again. You may need to try a different child restraint. Not all child restraints fit in all types of vehicles. 2 2. Anchor point ᭺ Rear bench seat 1 1. Top tether strap ᭺ INSTALLING TOP TETHER STRAP The child restraint top tether strap must be used when installing the child restraint with the LATCH lower anchor attachments. First, secure the child restraint with the LATCH lower anchors (Rear row bench outboarding seating positions only). 1-38 Safety-Seats, seat belts and supplemental restraint system