1995 Oldsmobile 88 Owner's Manual - Page 81

If you leave the turn signal on, a chime will sound after you've driven 3/4 of a mile. A green arrow on the instrument panel will flash in the direction of the turn orlane change. To signal alane change, just raise or lower the lever until the green arrow starts to flash. Hold it there until you complete your lane change. The lever will return by itself when you release it. Headlamp High-Low Beam Changer To change the headlamps from low beamto high or high to low, pullthe turn signallever all the way toward you. Then release it. When the high beams are on, a blue on the light instrument panel also willbe on. Flash-to-Pass This feature lets you use your high beam headlamps to signal a driver in front of you that you want to pass. It works evenif your headlamps are off. To use it, pull the turn signal lever toward you. As you signal a turn or a lane change, if the arrows don't flash but just stay on, a signal bulb may be burned out and other drivers won't your turn signal.If a bulb is see burned out, replaceit to help avoid an accident. If the green arrows don't go on at all when you signal a turn, check the fuse. See "Fuses and Circuit Breakers" in the Index. If you have added wiringfor the towing a trailer, a different turn signal flasher may used. With this be flasher installed,the signal indicator willflash even if a turn signal bulb is burned out. Check the front,and rear turn signallamps regularly to make sure they are working. If your headlamps are on, but on lowbeam, the system works normally. Justpull the lever until it clicks. Your headlamps will shift to high beam and stay there. To return to low beam, pull the lever toward you. just If your headlampsare on, and on high beam, your headlamps will switch to low beam. get back to high To beam, pull the lever toward you. 2-29